Will a 19in in length muffler fit in a 240z. There's a muffler I am thinking about getting but dont know if it will clear the normal fitting location. The specs are,

Body length: 19in, Cross section H x W: 11" x 4 1/2, Shape: Oval.

Thanks,

Saro

If not, what other aftermarket mufflers are being used in a 240z? This way I can check their specs and see if it's comparable.

Thanks,

Saro

I have a turbo style on mine, 18" overall including pipes, 14" long body 10" wide. I don't think anything much larger would fit easily without rebending pipes.

I agree with Lance,just put the same size on my 240,too tight for anything larger

TTDriver,

I have a Dynomax Ultraflow SS muffler (WLK-17283) from Summit Racing (http://store.summitracing.com/) installed on my 240Z. The measurements are below.

Case Length (in): 14.00

Overall Length (in): 19.00

Thickness (in): 4.25

Width (in): 9.75

A 19 inch case length sounds too big to me.

You can see details of my exhaust installation @ http://www.classiczcars.com/forums/showthread.php?t=12474&page=2&pp=15

Cheers,

Thanks for the help guys. Sean, very helpful link, appreciate it. I just found out that the muffler I wanted (Ractive M040) is now discontinued . Guess it wasn't meant to be. I thought this would be a nice dual stacked muffler for the Z. Any one know of a muffler with a single inlet and a dual outlet stacked on top of each other with a stainless finish?

Thanks,

Saro

TTDriver,

WLK 17519 available from summit racing might meet your requirements.

http://www.dynomax.com/documents/ultrafloss_specs.pdf

3" inlet 2x2.5" outlet.

Cheers,