Need a part, please help!

[78 280zcar]

Well I finally got everything back together on the engine and was getting ready to put the tranny back on to stab the engine back in, when I found out that the tranny cover (behind flywheel) I had for my automatic doesnt work for a manual tranny :stupid: . Well now I am in need of that plate if someone may have one that I can buy please let me know!

[tttz]

i have one from a 71 4speed. Will that work? I'm not sure when i could get to the post office to mail it though.

Have you tried the local pick n pull?

-Ty

[Arne]

Thanks for reminding me, I'm going to need that as well. Not sure how soon I'll have all the parts gathered up, but I will be installing a '71 4 speed box, Ty. If you still have that later down the road, I may be in touch.

But for now, if it will work for Shane, he's got dibs.

[78 280zcar]

How much are you wanting for it and do you have a paypal account so I can pay with a credit card. Thanks alot, I couldnt find any at the pick and pull we have over here. About a month ago they had five different Z's now they have one that is stripped. Shane

[78 280zcar]

Hey and if it doesnt work I can always send it to you Arne.

[sblake01]

It will work.

[azcarbum]

I think I have an extra backing plate as well.

[First Gen Z]

I have several extras. If you still need one, you can email me direct at skipzcar@aol.com

[Arne]

I think I have an extra backing plate as well.

Good to know, Brian. When I get close to doing the tranny swap I'll contact you.

[78 280zcar]

I went ahead and got one off of ebay took a while but it showed up yesterday. time to get her back together. Thanks guys for all the help.