73 240z running rich

[wfl_colorado]

I would really like to understand the issue w/ the flattops before I do the conversion. I am going to try a few things first. Like is the rear carb even getting any gas? Secondly, is there something wrong w/ the front carb regarding excessive gas(stuck float, etc)? I think float investigation requires carb removal, correct? I have read something out of the Haynes manual that talks about a float window that can be observed while on the car. Anyone know anything about this?

Kenny, does the shop you refer to near Longmont have a website per chance?

Bill

[Arne]

I've never really looked a any flat-tops, but I think from your symptoms a stuck or leaking float is a high probability.

[=Enigma=]

Here's a link to some info on Flat Tops. It's not much but it's about all I've seen on them, aside from the advice to ditch them.

http://www.jetlink.net/~okayfine/su/tunacan.html

[kenz240z]

Hi Bill,

No, T&D auto doesn't have a website. When I first bought my Z, I had them do a bit of work to make it safe to drive. The fellow I purchased the car from left it sitting for 7 years before I came along and bought it. I also had them rebuild the engine this past spring.

[wfl_colorado]

Thanks for the info and advice. I will keep you posted of my findings.

Bill