ARP flywheel/clutch bolts?....

[EricB]

Hi all,

I was just looking through the online ARP catalog and found that they don't carry Datsun specific bolts for flywheel and pressure plate. They do however have a selection of these bolts for both Honda and Toyota metric applications.

So does someone happen to know if our flywheel bolts are M10x1.0 or M12x1.25?

Same question for the pressure plate.

Thanks,

-e

[Ed]

The flywheel bolts are 12 x 1.25 and are 27mm long they also have an oversized head requiring a 19mm socket.

The pressure plate bolts are 8 x 1.25 not sure about the length but somewhere around 19mm.

[PrOxLaMuS©]

you NEED to get Grade 8 (metric) or 10.9 (sae) for those bolts.. dont go any lower

[montoya_fan01]

actually, it would be Grade 10.9 for metric bolts; or Grade 8 for SAE bolts