Just curious if anyone has an educated guess on the weight of a stripped

240z. Engine, transmission, doors, all the way down to the hull. Am working

on a rotisserie alternative and this info will help. I know I saw a thread here

in the past where someone stated that they were able to take lift one off

the back of a trailer using only 4 people. Thanks.

I'd say about 350 lbs. My neighbor and i was able to pick up and move my body shell around. IT WAS HEAVY! but we were able to do it. There wasn't a single screw left in it when we did, Bare, bare nakkid Fairlady

Thanks for the reply VL!

I cut a 4x4 post the width of the car and drilled it to fit the mustache bar bolts. At each end of the 4x4, I bolted a castor wheel from Harbor Freight - the large ones. I pick the car up at the front frame rails and wheel it around. The front is real light. The back takes two guys to lift.

It can't be much, the only thing I took out of mine at the time we picked mine up was the engine and tranny, everything esle was still on it and 3 of us picked the front up about 2 1/2 foot to the trailer then picked up the rear and pushed it up!

A member on HybridZ weighed a bare unibody and reported 520#, but I don't recall what year chassis it was. A search would probably turn it up.

John