Weight of stripped car?

[Zthing]

Just curious if anyone has an educated guess on the weight of a stripped

240z. Engine, transmission, doors, all the way down to the hull. Am working

on a rotisserie alternative and this info will help. I know I saw a thread here

in the past where someone stated that they were able to take lift one off

the back of a trailer using only 4 people. Thanks.

[Victor Laury]

I'd say about 350 lbs. My neighbor and i was able to pick up and move my body shell around. IT WAS HEAVY! but we were able to do it. There wasn't a single screw left in it when we did, Bare, bare nakkid Fairlady

[Zthing]

Thanks for the reply VL!

[26th-Z]

I cut a 4x4 post the width of the car and drilled it to fit the mustache bar bolts. At each end of the 4x4, I bolted a castor wheel from Harbor Freight - the large ones. I pick the car up at the front frame rails and wheel it around. The front is real light. The back takes two guys to lift.

[cremmenga]

It can't be much, the only thing I took out of mine at the time we picked mine up was the engine and tranny, everything esle was still on it and 3 of us picked the front up about 2 1/2 foot to the trailer then picked up the rear and pushed it up!

[jt1]

A member on HybridZ weighed a bare unibody and reported 520#, but I don't recall what year chassis it was. A search would probably turn it up.

John