rbm260z Posted January 21, 2006 Share #1 Posted January 21, 2006 I need help in reference to the tail light gaskets. I just received them and both are the same. Both have a recessed area for the bolt/nut to go through. Would it make a difference if one of the gaskets (right side OK) left side is reversed, all holes match up and appear to be OK on the left side. Should I use contact spray to hold in place while installing them? Any help will be appreciated!!!Randyrbm260z Link to comment Share on other sites More sharing options...
beandip Posted January 22, 2006 Share #2 Posted January 22, 2006 I have a 240 so I don't know about the 260 weather or not that they are sided or not. However dont use spray adheasive use a THIN coating of silicone sealer. This way it will seal real well and if you need to remove it some day it shouldnt tear . Link to comment Share on other sites More sharing options...
mriz Posted January 22, 2006 Share #3 Posted January 22, 2006 Shouldn't be sided but just put a call in to where you got them to be sure. It didn't matter on my 280. Link to comment Share on other sites More sharing options...
rbm260z Posted January 22, 2006 Author Share #4 Posted January 22, 2006 Thanks Beandip, good advise!: :classic: Link to comment Share on other sites More sharing options...
slogan5
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now