Reproduction Flasher Decal on Dash--any interest?

[Arne]

Well, late Series I cars have much different stickers. Mine appears to be thick, fairly durable, and different. Luckily, mine is in great shape. Here is the picture:

[dogma420]

Arne--yeah that is very different

Enrique-I thought at one point my rig was a Series II.

What I've been told, again and again is this:

Series I--rear hatch vents

Series II--no rear hatch vents, model year 71...holes in steering wheel, tool boxes moved.

Series III--same as series 2 essentially, but model year 72...had rear diff moved back (not sure if this was included in S II). From what I've been told, my 10/71 vin 56895 is a Series III. Most have horizontal defrost lines (mine in 10/71 had vertical).

Series IV--emission carbs, models 8/72 to end of 240z

Still looking for more desire for this sticker; it won't be feasible unless I get at least 20 takers. If not, I can just repaint it (carefully!).

Looks like this sticker will be for Series II-IV.

[AZ-240z]

If anyone is interested, I have reproduced the hazard switch decal as shown by Arne, above. It is an exact quality reproduction on vinyl. If $10 sounds fair to anyone interested, let me know. This decal was found on series 1 cars and the decal placement can be seen in Arne's reply.

Dan

[ddezso]

I'm interested. I live in Scottsdale. Ever go to the Pavilions show when the DZA is there?

[xray]

If you have someone who works at a decal manufacturer, maybe you could also generate stickers which replicate those placed the three heater control console levers...I would pay $$ for that and the hazard sticker....

Steve

[AZ-240z]

dogma420,

I apologize for muscling in on your thread with the decals which I reproduced for the early 240z. This has, possibly, led to some confusion about which decal is referenced in some replys. These are two different decals for early and later cars.

I just thought it would be easier to lump this purpose specific decal in the same thread for ease of reference in the future. Let me know if I should start a new thread if I am infringing. They are two distinctly different decals.

Dan

[Marty Rogan]

If anyone is interested, I have reproduced the hazard switch decal as shown by Arne, above. It is an exact quality reproduction on vinyl. If $10 sounds fair to anyone interested, let me know. This decal was found on series 1 cars and the decal placement can be seen in Arne's reply.

Dan

I would proably take 2 -3 of them. Can you post a picture of the finished product?

TIA,

Marty

[AZ-240z]

I just got a new computer. It needs to be hooked up to a local cable provider, and I need to become computer literate as far as posting pictures.

What I guess I am saying is that it is going to be possible a week or so before I can show what I have. Thanks for your inquiries and patients, and I'll keep everyone posted.

Dan

[dogma420]

Just wondering.....

I think....

that any of the Zs from the beginning to somewhere in the middle of Series II (mid 71) that have the cigarette lighter under the radio would require the little rectangular sticker that Arne is doing....is that right?

How long does the 'cross shaped' sticker for the hazards stay on the scene? Would this to from where the cigarette lighter is between the heater controls and driver's area up until the 260z, which has the 280z style dash...is that right?

So numbers speaking,

The small rectangle hazard sticker that arne makes would fit vins of 1 to approx ????

The cross style hazard sticker would fit vins of ???? to ????

Anyone help out here?

[a7dz]

The early Series I's have no decal at all.

[montoya_fan01]

Just wondering.....

I think....

that any of the Zs from the beginning to somewhere in the middle of Series II (mid 71) that have the cigarette lighter under the radio would require the little rectangular sticker that Arne is doing....is that right?

How long does the 'cross shaped' sticker for the hazards stay on the scene? Would this to from where the cigarette lighter is between the heater controls and driver's area up until the 260z, which has the 280z style dash...is that right?

So numbers speaking,

The small rectangle hazard sticker that arne makes would fit vins of 1 to approx ????

The cross style hazard sticker would fit vins of ???? to ????

Anyone help out here?

Man it's getting confusing since the hijacking of Dogma's thread.

I've re-read the thread from Post #1 to my post and I don't see that Arne is "doing" any decal. He posted an example of the one on his car. (thanks for that, Arne); but I thought it was Dogma who was considering having the cross style ones made and then AZ-240z who has the rectangular ones.

Where am I getting lost here?

[AZ-240z]

Montoya fan01

You got it right. I have reproduction decals for the early series 1 cars, and Dogma is considering making decals for the cars that had the cross indentation in the dash to the left of the hazzard switch.

As far as I have been able to research, the decal shown by Arne was on all series 1 cars through 1/71 production dates. I have seen original cars with vins of 5xxx and 12xxx with this decal. My car produced in 1/71 also had the decal. I realize that I am making an assumption base of the above info but maybe others will chime in to better define the use of this decal.

Dan