Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

Replacing Head lights


owenk

Recommended Posts

Does anyone have any experience with switching out the sealed beams on a 240? I am also thinking of placing driving light behind the grill. Has anyone had any experience doing this?

Thanks

Link to comment
Share on other sites


There are pretty much 2 ways to pull the headlights out.

1- pull the retaining ring off through the headlight extension (from the front of the car). Might be a little difficult since the ring screws may be hard to see (and they are a little small), but it can be done.

2- pull the headlight assembly out through the backside of the fender (out through the wheel-well). There are 4 screws (most likely phillips-head type) that hold the assembly onto the fender. You'll need to clean the area real good before attempting this. The heads of the screws will be clogged with dirt and road-grime. Take your time and don't strip them out.

Once you have the assembly out, removing the headlight sealed beam is relatively easy.

Link to comment
Share on other sites

You can replace them easily enough with a halogen unit. My car at one time had the Hella conversion.

Fit is nice and looks great, but unless you take the added current out of the column switch (by using relays), you'll burn it all up. Mine has done it once already.

Link to comment
Share on other sites

kmack:

Were you using a higher wattage bulb than that that is "standard" for the car? I've read in several posts that if you are just replacing the lights with the same wattage (voltage is the same) as what the car had originally that you don't need to do a complete rewire.

Since that's the phase of my project right now, I want to make sure.

Thanks in advance.

Enrique

Link to comment
Share on other sites

EScanlon, I'm not sure what the wattage is(was). I still have the lights, but I'm not using then right now.

I do know that from 6" away, you could feel the heat coming off the lights. They were that bright. Could possibly be the reason why my wires all melted into one big glob and why I saw smoke coming from my steering column!:eek:

Eventually, I want to put them back in, I think I put in the relays just for safety reasons and it can't hurt with 31 year old wiring.

Link to comment
Share on other sites

I am looking at some headlights called Crystal Headlights and they claim to be the "LATEST EURO DIAMOND CRYSTAL STYLE" they come with Bright White bulbs with a hood. Does anyone have anything to say about these lights? :ermm:

THanks

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 588 Guests (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.