Jump to content
We Need Your Help! ×

IGNORED

No Front Turn Signals - Help


Chris280Z

Recommended Posts

I have no front drivers side directional and intermittent passenger front directional, the rears work fine hazard and turn. I took apart the hazard switch and cleaned it and all connectors with elec. contact cleaner. My car is a 72 with an 81 turbo motor with 77 electronics & dash. I also have a78z and pulled the flasher and switched them, same result. I cleaned the light switch on the column with cleaner also. When I put the multimeter in the bulb socket when the flasher is on the meter jumps from 0 to 6-8 volts. I think it's getting all but turing off and on quick for the meter. But the bulb doesn't light. Yet the same bulb lights fine when the parking lights are on. All I can think of at this point is a bad ground but why would the parking lights work fine? This is the last hurdle to get the car inspected. Please advise.

Thanks Chris

Link to comment
Share on other sites


Try the harness conectors at the small/sub harness between the center console and the main dash harness on the passenger side it runs across the trans hump to the fire wall, [assuming you are using the dash harness from the 77-Z you mentioned.Look for the nasty green corrosion.

good luck!!

JZM..

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.