TomoHawk Posted May 14, 2006 Share #1 Posted May 14, 2006 That's what those two odd screws are for on the left side of the front bumper, except mine are rusted and the slot in the head doesn't look too strong. So since you are required to have a license plate on the front in my state, I'll probably need the plate frame too.Except the parts CD doesn't show a good picture of the front license plate frame.thx. Link to comment Share on other sites More sharing options...
sblake01 Posted May 14, 2006 Share #2 Posted May 14, 2006 They didn't have a frame, except in Canada. There are four holes, two for the Japan size plates and two for the smaller plates. The plate bolts or screws directly to the bumper. Link to comment Share on other sites More sharing options...
TomoHawk Posted May 21, 2006 Author Share #3 Posted May 21, 2006 I'll try to get those screws out next week, but it won't be easy(screw slots look stripped). Do you thinj I could get or make a license plate fram to bolt into those holes? I measured, and you were correct, as the distance between the holes is less than the U.S. plates. I thyink an off-set bracket would work.thx Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now