260Zbuzz Posted May 20, 2006 Share #1 Posted May 20, 2006 Hello everybody...my flasher unit on my 260z is bad. I am assuming AutoZone or somebody like that will carry this?? Can anyone confirm? Thanks Link to comment Share on other sites More sharing options...
beandip Posted May 20, 2006 Share #2 Posted May 20, 2006 Just the standard with two spade connections is all you need Link to comment Share on other sites More sharing options...
MAYHEM Posted May 20, 2006 Share #3 Posted May 20, 2006 http://www.partsamerica.com/ProductList.aspx?parttype=121&searchfor=Flashers&ptset=A or just swing by Advance or the Zone. very common item Link to comment Share on other sites More sharing options...
240ZGL Posted May 21, 2006 Share #4 Posted May 21, 2006 I think it's a 244 Link to comment Share on other sites More sharing options...
Mr Mills Posted September 28, 2006 Share #5 Posted September 28, 2006 This may be highly relevant to your question or may just not matter. Here it is I own several Z cars 74/260 76/280 77/280 2+2 and am a Old man Datsun collector. To the point ....I once had a right front signal bulb go out. No big deal, stopped into the nearest parts store and popped one back in. The signal worked again all was well. Breifly... then strange things started occurring I went for local Z car expert who ask me ...You haven't by any chance changed a bad signal (right front ) lately? I said yes how could you have known that? He said if you will notice the wattage on the bulb is different than the original OEM and while the light will work it is tied in to the ECU unit and causes problems that the engineeers don't generally think about when designing the schematic layout. In short after putting in the OEM signal replacement bulb with the proper wattage...Perfect again... all was well with the strange acting motor problems. What a strange thing I said. But one I will never forget. OEM is usually my preference since that rather strange experience. It appears all the circuit designed has been carefully added to accurate resistances and design characteristics. Kinda weird but since that occurance I have heard of other vehicle manufactures doing the same thing. Hope someone benefits from this . Happy Z Remeber problem fixed new one occurred. Blew my mind that two things so distant could be relevant. Link to comment Share on other sites More sharing options...
sblake01 Posted September 28, 2006 Share #6 Posted September 28, 2006 The post is almost a year and a half old. I would imagine he's solved the problem by now! And there is no correlation between the ECU and turn signals on an S30 especially on a 260Z which doesn't even have an ECU. Link to comment Share on other sites More sharing options...
MikeW Posted September 28, 2006 Share #7 Posted September 28, 2006 The post is almost a year and a half old.Is it 2007 already? Link to comment Share on other sites More sharing options...
sblake01 Posted September 28, 2006 Share #8 Posted September 28, 2006 Is it 2007 already?Ooops:stupid: Link to comment Share on other sites More sharing options...
Patcon
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now