Posted June 2, 200618 yr comment_169695 Im looking to change my rear drum brakes to disk. I would like to have suggestions of which ones are best. Im interested in a simple conversion, does not require large modifications and is inexpensive (less than $500). Does it exist? Link to comment https://www.classiczcars.com/forums/topic/20273-rear-disk-brake-conversion/ Share on other sites More sharing options...
June 2, 200618 yr comment_169699 www.modernmotorsports.com Ross builds some great stuff, and his rear disc conversion is no exception Link to comment https://www.classiczcars.com/forums/topic/20273-rear-disk-brake-conversion/#findComment-169699 Share on other sites More sharing options...
June 2, 200618 yr comment_169716 If you do a search on that, I think there was a cheaper way that involved using a bracket from a Maxima. There was a write up somewhere that listed all the parts needed with Nissan part numbers.scott Link to comment https://www.classiczcars.com/forums/topic/20273-rear-disk-brake-conversion/#findComment-169716 Share on other sites More sharing options...
June 2, 200618 yr comment_169728 Go with the MM brackets and E-brake extensions. Pick up rotors and calipers (if only for cores) at the PNP. You'll also need brake lines. There are extension write-ups regarding this over at www.hybridz.org under the brakes/wheels/suspensions/chassis section. The very first sticky will be a big help to you. The Maxima brackets are NLA as far as I know. If you can find a set you'll be very lucky and still spend $$. You'll end up spending that $500 and maybe more/less. It depends on how creative you are and the quality of the junkyard parts. Link to comment https://www.classiczcars.com/forums/topic/20273-rear-disk-brake-conversion/#findComment-169728 Share on other sites More sharing options...
June 3, 200618 yr comment_169759 The Caliper brackets are still available-as of 5pm today for about $70 each depending on the Nissan dealer, part# 44155-04S10.Use car-parts.com to find the used parts(I found and bought a very recent pair of the calipers for $40 that were local to me that way) I bought new rotors from RockAuto for about $80. As EZZZZZZZ says, the price depends on how much work you are willing to do to save money, and how lucky you are in your search...Will Link to comment https://www.classiczcars.com/forums/topic/20273-rear-disk-brake-conversion/#findComment-169759 Share on other sites More sharing options...
June 3, 200618 yr comment_169812 Thanks Will. I thought I'd read that these brackets had become very elusive. Link to comment https://www.classiczcars.com/forums/topic/20273-rear-disk-brake-conversion/#findComment-169812 Share on other sites More sharing options...
June 3, 200618 yr comment_169849 I bought a set on ZCar.com back in the Summer (year ago) with 240SX calipers for 100.00 shipped. I just found a set a few months ago attached to the Maxima I was pulling an LD280 crank out of. It is just a matter of luck when looking, but check every Maxima 81-84. Look for the large head bolts on the ends of the axle tube (4) behind the rotors. If Phillips head screws (holding the backing plate), then a welded unit. By the way, save the bolts, otherwise you will have to scrounge the appropriate fasteners (a slightly different length, than commonly available at Ace or Lowes).Good Luck! Link to comment https://www.classiczcars.com/forums/topic/20273-rear-disk-brake-conversion/#findComment-169849 Share on other sites More sharing options...
Create an account or sign in to comment