Looking at a trade for yet another set of vintage rims. Who has a set of these? I haven't seen these in person yet, so I can't measure them. I know they're 14x5.5", but I'd like to know what size the center hole is so I can determine center caps for them.

Also would love to see pics of these on a Z, especially red ones!

Arne,

these are on mine and look similar. wasn't too crazy about them. PO also had slotted mags. but they are growing on me.

center hole size is 3.25" as best I can measure. My fronts have screw on caps, the rears have push on.

Nice wheels to bad they didn't come 15's...

I've got the same wheels on mine. I've always wondered what the "P/S" on the center cap was for.

don't know if they are the original caps or not.

Those were the dealer-installed wheels when I bought my car in '72. Ran them until about 1985.

14x5.5, 3 3/16 center hole, also had the "P/S" center caps. Was told by the dealer that they were "Per-Spec" mags ... never knew for sure if this meant they were "Performance Specialties" mags.

No photo of the wheel on a red car ... only a photo on a silver car (this was scanned from an old, grainy photo taken more than 20 years ago).

RED Car?

Here you go! My brand new Z, Ruby !

~Z~

Looks like these also came in 13x5.5 with a 4.98 bolt pattern for

Fiat X-19 and/or 124 Spider.

The guy also lives in southern Cali. (Costa Mesa, California)

http://cgi.ebay.com/ebaymotors/13-inch-Fiat-x-19-wheels-rims-4x-98-124-spyder-spider_W0QQitemZ280193190016QQcmdZViewItem?hash=item280193190016

They were also made in a 15" with a lug pattern that would fit VW Beetles. I don't recall seeing them on Fiats back in the 70s but I guess they were probably made for quite a number of fitments.

I just got my mags of this pattern down from the attic a few days ago and you will see them in the Classifieds sometime in the next week or so .... I've got to take some photos this weekend.

Goose

I do. Does anyone want them?

http://www.classiczcars.com/photopost/showphoto.php?photo=25606&cat=500&ppuser=5338

Anyone happen to know the name the design?

On the Fiat version there seems to be a stamping on the

back which says "CT" or "GT" next to the size stamping,

is that the name of the design by chance or

something else related to the rim size?

~Z~

No model or design name on the back of mine. See the photo - just P/S and the size.

I know for a fact that more than one company made this style. I've seen them with both pop-in and screw-on center caps, and at least two different size center holes for the pop-in type.