Need a Connector

[MAX]

Greetings To All,

I am in need of a 3 prong male connector like the one shown in the attached picture. This particular one is from the antenna switch cable on a 73 240Z. Would anybody have one of these they would like to part with or know where I could get one. ?

Many thanks...

[sblake01]

You can buy the entire switch which fits in place of the large blanikng plate. Check out my post in another thread.

http://www.classiczcars.com/forums/showthread.php?p=211492#post211492

[DatsunZsRule]

Hey Randy,

If no one here has an extra one, try e-mailing Z Car Source. I've always had real good luck with them. They always seem to be able to get any hard to find Part for the classic Z Cars.

There e-mail address is info@zcarsource.com

Best of luck.

[JLPurcell]

If you don't have any luck elsewhere you could try Precision Wire Products in Hagerstown, Indiana. They have helped me out on a couple of replacement connectors. They build wiring harnesses and lots the connectors are standard. JLP

[sblake01]

The entire switch with the connector is under $10 plus shipping at nissanparts.cc as I said in the linked post and it's still available.

[MAX]

Thanks to all who have replied here...

Stephen,

I checked out the Nissan site you referred me to and I plan on ordering that whole assembly. Thanks for the headsup on that one.

Randy

[GreenZZZ]

Check out http://www.vintageconnections.com/ and http://www.crc2onlinecatalog.com/connectors.htm