Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

mesh wheels


mars23z

Recommended Posts

Last summer I bought new wheels for the Z and have a set of mesh wheels(see gallary) that Im not sure what to do with. I dont know the brand all I know is they were put on shortly after the car was purchased new. I am wondering if I should keep them or if anyone has any interest in them.They have tires on them that will have to replaced as they are a little cracked but the tread is good the wheels are 14x5.5 or 6 I can look in the rim for the size and I can put up some better pics. They look like enkie or appliance maybe Arne can tell. Not sure if Ill sell was trying to get a reaction from you guys first. Thanks for the help. Chris

Link to comment
Share on other sites

Hard to say, as the images in the gallery don't show the wheels up close. Not Enkei's, might be Appliance - if so they are probably 14x6. If you've got a close up I might be able to pin them down. Also look for any words or numbers cast/stamped in the back side.

Here's an Appliance.

post-8596-14150800186117_thumb.jpg

Link to comment
Share on other sites

Arne, the ones in your picture look like Appliance to me. I have the same ones if they are appliance. If you don't mind telling me where you got the center caps. Mine are rusted.

thanks Mike

Link to comment
Share on other sites

Yes, the one I pictured is an Appliance. I used Eagle center caps on mine, from Massey's in Oklahoma, as noted in this thread:

http://classiczcars.com/forums/showthread.php?t=22863&highlight=appliance+caps

The Eagle caps are the proper size, are retained in the same manner, and are very similar in shape to the original Appliance caps, but have the Eagle logo stamped in the center. I'm going to try to cover the Eagle logo with "Z" stickers from MSA soon. Not sure how it'll look, the Z stickers are 1.5" but the recess on the caps is 1.75". I have found a source for 1.75" Datsun stickers, but they are a bit more colorful than I'd prefer on my wheels. I'll post pictures (maybe in the other thread) once my Z stickers get here.

Link to comment
Share on other sites

Probably Appliance then, although I've seen some that are virtually identical that were made in Japan. Perhaps made for and distributed by Appliance as well, since they had old, rusty Appliance caps also.

Link to comment
Share on other sites

The original owner said they were put on at the Datsun dealership when he bought the car. I thought I might use them if I ever buy another Z but the problem as you well know is getting 14" tires. I know they are out there but limited. The other reason I would want them is just for the simple fact that they are old and in realy good shape. When I bought the car I took the mothers powerball to them and WOW what a difference they look nice and shiny now. Oh and by the way I think the center caps were just a generic brand the ones that came with spinners. Now those were put on back in like the early 90's. Not sure what was on it before that for caps. I actually used the spinner caps on my new rewinds cause the ones that come with those dont clear the dust caps and they look great.

Link to comment
Share on other sites

Hard to say, as the images in the gallery don't show the wheels up close. Not Enkei's, might be Appliance - if so they are probably 14x6. If you've got a close up I might be able to pin them down. Also look for any words or numbers cast/stamped in the back side.

Here's an Appliance.

i like the ssr mesh, there offsets are really low, i like the deep dish look, :rambo:

Link to comment
Share on other sites

Well, if they are as old as the car, they almost have to be Appliance. Not many other choices in that style that long ago.

As for the spinners, it's good to know they fit on the Rewinds, since the real Rewind caps don't. Although I've never cared for the looks of those things, personally.

Link to comment
Share on other sites

Hey Arne. I bought the Z adhesive gel centers from MSA and they don't fit. They look funny, being to small for the Eagle center cap. I used them for my toolbox.
I was afraid of that. Oh well, they were cheap. I suspect they'll arrive today.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 590 Guests (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.