i am cleaning up my 76. unbolting everything and wiping everything down. this can hasnt been cleaned since at least 96. so sad.

so it all looks good except for the booster and the big black bracket for the fusible links.

then it begins. i could nt take it, so i took out the booster, the bracket thing, the coil and the bracket for the booster check valve.

heres how the booster turned out.

all i did was sand it with 180 and 400 sand paper, clean it, primer and paint it.

i know its not a perfect match, but i does look really close to my 77 that is still shiney.

opinions?

thanks

tony

That looks great! If you didn't tell us, I would have thought it was a pic of a NOS unit.

What paint did you use?

That looks super Tony.

i used rust-oleum rust remover primer, then rust-oleum black gloss protective enamel(white can).

thanks

tony

Very nice job! Looks brand new.

Did you just mask off the labels with masking tape prior to sanding and painting?

Very very nice! Makes me want to do the same with mine!

Very nice job! Looks brand new.

Did you just mask off the labels with masking tape prior to sanding and painting?

i used 3m blue painters tape. just carefully cut out the sticker. slowly. very slowly.

then paint away.

nice, from what I see in the photo's, the original sticker looks new!

looks awesome!!