nix240z Posted December 7, 2015 Share #49 Posted December 7, 2015 Cliff - that is exactly the process I used for my install. Also - lube the filler neck a bit to make it easier to slide into the plastic tube as you raise the tank. Jim Phooey - just realized I am responding to an old post. I offer the four hose grommet boots http://www.240zrubberparts.com/apps/webstore/products/show/4626636 Steve Link to comment Share on other sites More sharing options...
cnwayland Posted March 6, 2016 Share #50 Posted March 6, 2016 (edited) On December 7, 2015 at 9:28 AM, nix240z said: I offer the four hose grommet boots Steve Any chance you'll be stocking these again Steve? Edited March 6, 2016 by cnwayland Link to comment Share on other sites More sharing options...
nix240z Posted March 6, 2016 Share #51 Posted March 6, 2016 9 hours ago, cnwayland said: Any chance you'll be stocking these again Steve? Yes, they are on my list to make up in my next batch of parts. Steve Link to comment Share on other sites More sharing options...
ZCCOR#109 Posted March 8, 2016 Share #52 Posted March 8, 2016 March 2016 update i just ordered hoses and I'm in the process. Tank is down and out. Trying to figure out sequence of removing these very stiff hoses OUT. REASON IM WRITING found a source of metric hoses that are all modern fuel(ethanol ) rated Belmetric.com. A source of metric fasteners and hoses the braided 17 & 14 mm ...search RH17 and RH14 for CONTINENTAL vacuum, fuel , etc hose the 5, 8, 10 mm ...search RMH 5, 8, 10 FLENNOR Multi fuel hose 19 mm is not available now to the bends...They offer stainless hose benders. A wire wrap that supports the hose and makes the turn RHBEND 23.6 for for the 17 mm hose RHBEND 21.2 for the 14mm RHBEND 16.5 for the 8mm NOT cheap but the correct products. Sold by the meter I got TWO meters of the 14, 17, 8, and TWO ea 14-17 benders!!! TOTAL $199.64 free shipping. I think I could have gotten by with one meter but?? It's just money. The labor is what is kicking my but at 71. 1 1 Link to comment Share on other sites More sharing options...
siteunseen Posted March 8, 2016 Share #53 Posted March 8, 2016 71!! You are my new hero. I did one when I somewhere around 41. Stayed in bed flat on my back for a whole weekend! 1 Link to comment Share on other sites More sharing options...
dvdmynhnz1 Posted May 12, 2021 Share #54 Posted May 12, 2021 From the 1972 FSM Link to comment Share on other sites More sharing options...
siteunseen Posted May 12, 2021 Share #55 Posted May 12, 2021 That's one of the many free FSM downloads this forum has. Link to comment Share on other sites More sharing options...
lenponz Posted November 18, 2022 Share #56 Posted November 18, 2022 https://www.newcoproducts.com/index.php?route=common/home They supply braided metric fuel hoses as well as JIS blots. FWIW: the top hose from the eVape tank to the fuel pipe is 22mm not 19mm as shown. I used a 7/8" fuel line w/no issues. Q: Has anybody put a metal eVape tank into a series 1??? I got a hold of a metal tank and couldn't make it fit. 1 Link to comment Share on other sites More sharing options...
Yarb
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now