Another "good as chrome" product?

[e_racer1999]

what's interesting is that i didn't even realize that it was xray being referred to vs. dogma.. oh well. back OT!

[TomoHawk]

Why would you put in a quoted message in your signature, when you can just type in the text?

[TomoHawk]

I agree will with Geezer that trying to cure the product on a plastic part will probably (melt) the part, but I wasn't suggesting that you toss a plastic part in an oven and leave it sit in the high heat- the normal way of curing the coating, so that's where the heatgun might help. Flash-heating only the surface of the part may give a useful result, but will have to see. When I try coating a metal part, I will cure it in increments to see if you can see the difference.

thxZ

[RolfSis]

OOps, blushing.

[twsutt]

Why would you put in a quoted message in your signature, when you can just type in the text?

Tommo-

I'm going to go out on a limb here and try my hand at answering your question - if I'm wrong I'm sure that someone will correct me...

I imagine that e_racer1999 placed the quote into his signature in that way to:

a) give credit to xray for the quote, and

show that the quote was from within our (Classic Zcar Club) forums.

There's no need for you to point out that the quote could have come from another forum (i.e. - HybridZ, et. al.). I'm pretty sure that one would assume that it came from these web pages before thinking that it was from outside. Besides, e-racer1999 seems like a pretty shrewd fellow, I image that he'd give a more detailed reference if it were needed.

Warning: I've seen several others on this forum that have someone quoted in their signature - pay attention and don't get confused. I got stumped for about 2 seconds the first time I saw this done; I believe that it was by KD_Matt.

But now that you've seen it done you shouldn't have any more problems understanding the next time you see it, should you? :stupid:

[twsutt]

Tommo, I'm interested in seeing how the results of your experiment turn out. I have several chrome on plastic pieces that need refurbishing - Door pull handle caps and tail light finishers.

[TomoHawk]

tw-

I need to do mine too! too bad you couldn't just put the old one in a machine and have it copy one in alloy.

BTW- I see people doing that quoting thing all over the Internet. It's been happenning for many months now.

[RolfSis]

Sorry, apparently I'm lost and no idea how I got into this thread and off topic. ":0(