Walter Moore Posted September 30, 2007 Share #1 Posted September 30, 2007 Ok, I searched the forums but was unable to find any reference to the correct part number for the oil filter on an L series engine.I had originally installed a Fram PH8A filter, because it fit and is the largest size of filter. I am only about 200 miles into the break-in period, but I changed the oil today because for the first tank of gas or so I had the front choke badly mis-adjusted, and the choke cables were twisted at an angle that caused them to bind on the air cleaner. The net effect was that I drove the car about 40 miles with the chokes stuck full on, and another 30 miles with the front carb way too rich. (It fouled the plugs up to the point that the car would not run twice.)Anyway, I went to the my local parts store this morning and bought 5 quarts of oil and a new filter. I tried to look up the oil filter in the book, but it only went back to 1980. (Of course.) Since I was in a hurry, I used the number that was listed for a 1980 280ZX. So now I have a Purolator # L14670 filter, which is the same diameter as the PH8A, but shorter.(Interesting side effect, the car only needed 5 quarts of oil with the filter change, not the 5.25 quarts that it did with the larger filter.)What oil filters are other people running on their Z cars? Does the older L series engine need a different filter than the one specified for the ZX? If so, why?(Another interesting side observation, apparently the anti-drain back valve in the Fram filter had failed in less than 200 miles, because when I took the filter off of the car it was empty. Very abnormal...) Link to comment Share on other sites More sharing options...
sblake01 Posted September 30, 2007 Share #2 Posted September 30, 2007 I use the Fram DG8A which is just the 'double guard' version of the PH8A on both my 78 280Z and my 79 810 which is set up like a ZX with the angled filter mount but it still fits. Link to comment Share on other sites More sharing options...
geezer Posted September 30, 2007 Share #3 Posted September 30, 2007 The Nissan part number for the screw-on oil filter is 15208-65011. You should be able to cross reference with that number for using other brands. Link to comment Share on other sites More sharing options...
DaveN Posted September 30, 2007 Share #4 Posted September 30, 2007 Fram PH8A and DG8A are correct. You can cross reference other brands to those. Link to comment Share on other sites More sharing options...
Walter Moore Posted October 1, 2007 Author Share #5 Posted October 1, 2007 Thanks for the help Link to comment Share on other sites More sharing options...
John Coffey Posted October 2, 2007 Share #6 Posted October 2, 2007 Napa 1515r. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now