280z1975 Posted October 2, 2007 Share #1 Posted October 2, 2007 I had a half-broken dove tail on my door when I got my car and took it off, the passenger side never had one. My doors close well and never seem to have any problems ... so why are they part of the door? I'm putting together a list of things that need replacing on the car and want to know if these are something to drop 20 bucks each on? Thanks for the help. Link to comment Share on other sites More sharing options...
Mat M Posted October 2, 2007 Share #2 Posted October 2, 2007 Where is this "dove tail" located on the door? I have not heard of any part on the doors called that. Are you talking about the rubber seal at the top front of the door, just in front of the stainless steel window rail? Link to comment Share on other sites More sharing options...
280z1975 Posted October 2, 2007 Author Share #3 Posted October 2, 2007 Here is a photo of the dove tail: Link to comment Share on other sites More sharing options...
TomoHawk Posted October 2, 2007 Share #4 Posted October 2, 2007 That looks like some kind of guide to align the dor latch. When you say Dovetail, I immediately think of the ones on the hatch lid (like on a 280Z). Link to comment Share on other sites More sharing options...
zbane Posted October 2, 2007 Share #5 Posted October 2, 2007 Gregg, what does the dovetail mate up to? If there is a hook or ledge on the jamb that it goes against, then perhaps it is a preventative measure against sagging doors. Since the driver's door is presumably the door that is used the most there may not have been a need for one on the passenger side.Just an idea. Link to comment Share on other sites More sharing options...
sblake01 Posted October 3, 2007 Share #6 Posted October 3, 2007 I have a 78 and there's no dovetail. In fact, my latches don't look anything like that. Must be on the 75-76(?) Link to comment Share on other sites More sharing options...
76Datsun280z Posted October 3, 2007 Share #7 Posted October 3, 2007 I have a 78 and there's no dovetail. In fact, my latches don't look anything like that. Must be on the 75-76(?)Must be. Mine has them too. Link to comment Share on other sites More sharing options...
280z1975 Posted October 3, 2007 Author Share #8 Posted October 3, 2007 Must be. Mine has them too.http://www.thezstore.com/page/TZS/PROD/SBC1B04E/30-2331When you go to the Z Store home page they are listed only as fitting 70 to 76 year models. I guess they weren't important enough for the cars to have them for 77 and 78? They were on both sides of the car ... I can't say for sure what they should align to as my car is at the mechanics getting the last little thing they government wants done for it to be road worthy.Like I said, it shuts and opens easily and without problem ... still wondering what those little buggers do ... I can post some of my own photos once the car is back (between now and Friday I hope).If you search for "dove tail" on the site there is surprisingly little on these ... Link to comment Share on other sites More sharing options...
yellazed Posted October 3, 2007 Share #9 Posted October 3, 2007 is like this: http://img503.imageshack.us/img503/6435/doorlockuk7.th.jpg' alt='doorlockuk7.th.jpg'> The dovetail is on the door and slides into the lock where the little white nylon spring loaded part is. It 'guides' the door into alignment to prevent any clash and is supposed to take care of any slight sag in the door hinges. Link to comment Share on other sites More sharing options...
twsutt Posted October 3, 2007 Share #10 Posted October 3, 2007 The dovetail wasn't eliminated from the '77-'78 models because it wasn't needed. The design of the whole door latching system was changed beginning with the 1977 model.http://www.classiczcars.com/forums/showthread.php?t=18960 Link to comment Share on other sites More sharing options...
EScanlon Posted October 3, 2007 Share #11 Posted October 3, 2007 Yellazed hit it spot on. The little white spring loaded nylon block also pushes against the dove tail to keep the latch pin rotating cuff on the door pressed against the latch catch on the post of the door. Later mechanisms inverted the design and then the post of the car has the pin and the door has the catch. Here's Yellazed's pic with an arrow pointing to the white nylong block, which on most cars has yellowed due to grease and age. E Link to comment Share on other sites More sharing options...
280z1975 Posted October 4, 2007 Author Share #12 Posted October 4, 2007 Thanks for the help everyone ... learned something new today (like most days with these cars) ... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now