shifter bushing

[two Zs]

Looking for a suppler fOF the brass bushings on the shifter of a 280z

[DeMoore]

I just put some brass bushings in my shifter from ebay for about 15 bucks. The store link is http://motors.search.ebay.com/_W0QQsassZcaptdavetools

or do a search for seller captdavetools

He has 100% feedback. I'm happy with the set I bought.

[SteveJ]

This might be a more economical alternative: http://www.atlanticz.ca/zclub/techtips/shifterbushing/index.html

[sblake01]

I tried the brass bushings. Didn't like the 'buzz' in the shifter. The stock ones work fine, and are quieter. I make sure I keep a couple of sets on hand.

[280~Master]

I don't like the atlantic Z set up, did that and it just does not fit right. Drilling and sorts. If you want quiet then use the nylon/plastic bushings if you want long life out of them, use the brass ones.

[dualies]

Thinking of getting it changed, not sure how much is involed. any input will be appreciated.

[DeMoore]

Thinking of getting it changed, not sure how much is involed. any input will be appreciated.

Hardly any once you get the the console and the two rubber boots lifted. I used a flathead screwdriver and it took about 2 minutes.

[Neumeier]

Check out this website: http://www.zzxdatsun.com/ . They have a kit for sale.