The State of Things....

[WingZr0]

I just get the 1st half of my invoice for Rubys engine

rebuild and so far we're in it for $1,761.25 :nervous:

ARP Head Studs $142

ARP Rod Bolts $56

Decked Block $80

Polish Crankshaft $45

Honed Rods $85

Honed Cylinders $50

Pulling Engine Labor $588

Build Engine Labor $700

Next on the list is ordering a set of JE Forged Pistons

and Rods with offset piston pins, another $700+

still have the brakes and 6-2 headers to go and

high capacity oil pump, aluminum radiator and

electric fan.

Almost done though, hopefully I can get her done by

July as long as this symbol (($))stays away :cheeky:

~Z~

PS, that damage report is still coming in.... lets jus say it wasn't good.....

[WingZr0]

OK this just in...

The Damage list in the case of

"Carb Gasket on FI Z".

1~ Oil pan gasket leak was worse off than thought,

in other words the crankcase wasn't even sealed properly and the preasure

was coming out in so many words.

2~ "Something" from the timing chain had broke off and was laying in the

bottom of the oil pan!

3~ The cam oiler spary bar wasn't even WORKING ! ! ! !

AT ALL ! ! ! ! ! !

4~ Head gasket was a cheap copper type instead of the steal layered kind

which should've been used hence the leak from that.

and 5~ We dont know what caused this but one of the crank bearings was

so pitted Nakatsu said had Ruby been a V8 it would've BLEW.

A testament he said to how well our S30 Z's were built, L24/26/28 and all.

I dont know who originally rebuilt my Ruby girls engine but they did not

do S*#$ right.

I know I know I know I shouldn't cous but this has all the markings of

sabotage or complet incompetiance.

~Z~

[full house]

!

any clues like finger prints or something to know who did it?

It must a great car thats why its been sabotage!

[WingZr0]

Enigne is now back in !

Gas was cleaned out few days ago.

All left now is Aluminim Radiator, set of new injectors, all new

polyurethane bushings and Willwood Disc brake conversion to be

drivable again.

Shooting for a first week of August finsish date

Pics and more updates to come.

~Z~

[WingZr0]

Took a look at my Ruby girl 2 days ago and she looks beutiful

The engine was still out when I got to the race shop to have a

look, all though the engine was fully assembled and sitting on a pallet awaiting the MSA Aluminum radiator still.

Thought it was in the car thanks to someone who heard wrong.

The engine color is Silver with everything from the oil pan down

pianted Blake.

Dean Nakutsu, the engine builder, wanted to paint the valver cover too but

I told him if he wanted to do that to use a another so I could save that

vintage looking Blue one with the Thrush Bird decal I put on it.

Guess what...., he put the Old Blue valve cover back on

Sick having a new engine with that flaking paint valve cover.

Reminds me of those 1950's gassers, know what I mean

Ver cool 70's touch I must say

Fuel Injectors arrived yesterday thaynx to Steven, "SBlake01"

and they look new as a bell.

OK OK, I know I promissed pictures but neglected to grab my camara sooo.. .

Well anyhow will take plenty of pics when I get her home.

Last thing I need opinion with, should I go ahead and get the

stock brakes from Les Schwab and be happy with those and upgrade later to

Wilwoods when I can afford the bigger wheels tires and LSD?

I mean I haven't driven my baby full force before yet so I don't know how

good the stock brakes really are, well I need to drive safe anyway so

maybe stock brakes are a good idea

~Z~

Edited July 28, 2009 by WingZr0

[Mike]

What's that thing where your oil cap should be?

I think it's the 710 cap..

[sblake01]

You went way back for that one!

[WingZr0]

More NEWS More NEWS

These parts will arrive Friday says MSA

1~ 4 row radiator, the natural finish aluminum one was sold out

2~ Chrome electric fan

3~ 5 injector "Z POLE" connectors

4~ steering rack dust boots, YEA!

5~ K&N cold air intake

6~ shifter bushings to fix the binding in the shifter linkage

7~ Shifter bushing inner dust boot covere, the little round joy stick shaped kind

under the inner shift boot.

8~ Shift cover, the shoe lace styler

9~ Trottle boot for the fire wall

10~ Master Poly Urethane bushing kit, all but the bump stops.

And just bought "1" red 2 1/4 inch inlet and outlet Thrush Glasspack at

the local speed shop, its like a old comic book place for cars , to replace

the Midas muffler I threw out.

I know I know, a new ANSA set is on it's way

Next on the list is the Lacara MK4 steering wheel discussed else where on

the forums.

One thing I need help on is finding a

TPS, Trottle Position Sensor, 3 prong connector plug.

You know, the plug that goes into the TPS itself and the cover for it.

Tried Courtesy and MSA and both said the only way to get that plug is

to buy a whole new wireing harness or take off another Z as the plug

by itself and cover is NLA or just not sold .

If any one has a spare of any of these please let me know and I can

send Paypal as well.

My number is 530-701-1244 since I'll be on a

train trip for the next three days.

Now I almost sprung for the short throw shifter kit cause it comes with

everthing to replace all the shift rods and related stuff but heard it was

more stiffer than stock and felt I only need new bushings to fix the

shifter binding issues.

Any opinions on weather I need more than shifter bushings for this problem?

Get the short throw?

Any help apreciated and thyanx again to all so far for your help these last

XXXXXX amount of years

~Z~

Edited August 5, 2009 by WingZr0

[sblake01]

One thing I need help on is finding a

TPS, Trottle Position Sensor, 3 prong connector plug.

You know, the plug that goes into the TPS itself and the cover for it.

Tried Courtesy and MSA and both said the only way to get that plug is

to buy a whole new wireing harness or take off another Z as the plug

by itself and cover is NLA or just not sold .

If any one has a spare of any of these please let me know and I can

send Paypal as well.

My number is 530-701-1244 since I'll be on a

train trip for the next three days.

I think I can help you there. If your connector is still there but just damaged I have replacements that can be soldered on. There from either a Volvo, Mercedes, or BMW I forget which. They have the quick release spring clip, the boot and can be easily soldered on. If you don't see this I'll call you.

I think it's the 710 cap..

No, that would be this:)......

Edited August 6, 2009 by sblake01

[WingZr0]

Thyanx Blake!

.

I think thats it and your correct, just the connector is damaged.

Let me know the Paypal price via PM and I'll give you the

address to the shop to send it to.

Juat need the cover now.

~Z~

[WingZr0]

Last batch of parts arrived this morning! Should fire Monday! Still need brakes fore i can drive still , going with stock, and "WingZr0 Spec" ANSA hung on the, "biggest exhaust possible", according to Dean . ~Z~

[WingZr0]

Anyone has a good spare TPS sensor? And also a cover for the 5 sided red and green wire terminal located on the inner fender wall between the AFM and starter coil? Both for a 77 Z. Call me up at 530 701 1244 if you do, 4 can do paypal.