Help with headlights

[zanthus]

I'll tear into it tomorrow I'm betting I'll have to reflow the solder and I'll probably even just run a new wire now that I have a better understanding of the headlight system. Thanks alot and I'll let you guys know.

[zanthus]

Pin 16 and Pin E. anyone got a picture of that? or can explain where it is. I finally have some time and I'd like to get to see if I can get this stuff to work.

[TomoHawk]

Steve,

Your picture in #37 needs a change. The V+ from the battery first goes through a fuse link, then through the combo switch to the fusebox, then to the lamps. The two ground legs go to the combo switch again (the other part of the combo switch) to control which beam is on. That's why the combo switch can be such a pain.

thxZ

[zanthus]

well if what you say is true then I guess its something else I'll have to look at.