this sway bar comes with thicker/new suspension uprights...sway bar mounts behind rear-end and on uprights and then goes forward to end links on lower-arms...BRE used this style..SUSPENSION TECHNIQUES offered this bar for a while but is NLA...THIS WOULD BE FOR A LATE 260Z/280Z..I guess early 240Z/260Z would work also...IF ANYONE HAS ONE THEY WANT TO SELL ..please E-MAIL ME AT.....BERACEZ@AOL.COM....WILL PAY TOP DOLLAR FOR CLEAN UNIT...

If you buy the Suspension Techniques bar for a 240 it comes with the uprights that you're looking for. Summit Racing has the best price last time I checked. The bar is 3/4".

If you get the Suspension Techniques bar for the 260/280, it mounts in front of the diff, because the later cars have a sway bar mount on the frame rails up front. Those bars are 7/8" but the arms are longer, so actual spring rate might be about the same, you'd have to measure it to figure it out for sure.

Hi all, FWIW I tried to order that Suspension Techniques rear bar from Summit Racing earlier this year and after several delays was told that they did not know when and if they would get it in stock. After waiting for 6 months I ordered the bars from MSA. I have a late build (6-73) '73 and it has the mounts on the chassis for the rear bar to be mounted in front of the diff. I got the mounting brackets for the 260 and have been very satisfied with the results. Of course this only works if you have the chassis mounts.

Cheers, Mike