Posted February 4, 200817 yr comment_236300 I found a 71 240z for sale. $1000. I looked at it a few days ago. looks complete. comes with some extra parts (weather stripping, kick panels, quarter panels) The engine is out of a 260z, new clutch, runs but carbs need cleaning. The only thing i found bad on this car is that there is plenty of rust right in front of the rear tires and there is a large dent on the quarter panel / drivers door. Is a grand a ripoff? or should i give it a closer look? Link to comment https://www.classiczcars.com/forums/topic/26963-potential-purchace-good-idea/ Share on other sites More sharing options...
February 4, 200817 yr comment_236301 Without pics we wont be able to tell Link to comment https://www.classiczcars.com/forums/topic/26963-potential-purchace-good-idea/#findComment-236301 Share on other sites More sharing options...
February 4, 200817 yr Author comment_236303 These are the only pics i have Link to comment https://www.classiczcars.com/forums/topic/26963-potential-purchace-good-idea/#findComment-236303 Share on other sites More sharing options...
February 4, 200817 yr comment_236307 Looks pretty rough. You'll have to spend some cash to get it to where you want it. I'd say $500 to $1,000 is fair. Link to comment https://www.classiczcars.com/forums/topic/26963-potential-purchace-good-idea/#findComment-236307 Share on other sites More sharing options...
February 4, 200817 yr comment_236309 hotrod , the rust that you see just rear of the doors down low , we refer to as the doglegs. This is a RED flag and could be vary expensive to repair . Vary likely it extends forward along the rocker , frame rail, forward to the front fender. there is no frame in these cars , all sheet metal uni-body. Look closely in these areas under and inside the car. If you can weld or have access to someone that will do the work , this can be of great help. Link to comment https://www.classiczcars.com/forums/topic/26963-potential-purchace-good-idea/#findComment-236309 Share on other sites More sharing options...
February 5, 200817 yr Author comment_236442 I can weld pretty well with a TIG. And the replacement panels come with the car. As for the big dent, are driver's doors easy or hard to come by (aka, would i rather slide hammer the dent out and bondo it or replace the whole door?)But yes, i need to go over the car again and see how bad the rust really is. Link to comment https://www.classiczcars.com/forums/topic/26963-potential-purchace-good-idea/#findComment-236442 Share on other sites More sharing options...
Create an account or sign in to comment