Runs rough + dies when revved.

[2.8.0.z.x]

Hey all,

My intake/exhaust gasket has deteriorated and I decided to go ahead and swap it out.

I took off the injector connectors, the 3 sensor connectors and the 4 clip-together wires on the top of intake manifold. I then took a look at the lower manifold nuts and decided to go ahead and do this when I had access to more tools.

I took the cruise control out along with the 2 vacuum sensors (I think that's what they are) located on the cruise control bracket with a vacuum line going between them. (I plugged the line)

I hooked everything back up (injectors/spark wires/sensors/4 weird wires) and now the car revs really harshly and drops down and dies when I let off the gas.

Any ideas greatly appreciated, this sucks,

Alex

[2.8.0.z.x]

Got it.

The vacuum line going through the firewall was connected to the wrong hole on the cylinder to which it should be plugged. (the thing that I guess builds up the vacuum to control the heater vents or something )

Sorry about being so vague.