I've got this spare right side door panel in our garage that I'm planning to put up on Ebay and see what happens because I have no use for it as it doesn't line up or fit my car. It measures 3ft' across and 20.5" down. I was wondering by chance if you guys knew what year(s) and what models (2+2 maybe) this fits as it's obviously not for a '76 280z.

Thanks guys, I appreciate it!

Don't think it's the 2+2 as that had a small door open latch at the back IIRC. Looks a lot like the one's I recall seeing on the 260 and 280.

E

Don't think it's the 2+2 as that had a small door open latch at the back IIRC. Looks a lot like the one's I recall seeing on the 260 and 280.

E

Hmmm. I measured the one on my car and it measures 37.5" and 20.5" down across, so it's actually just a big longer than this one but the same lenght going down.

Here I lined it up with the one on my car and you can clearly tell that the holes for the door luck do not line up.

The panel will fit a late build 76 to 78 280Z coupe. You will also notice the window crank mechanism is not in the same position.

The panel will fit a late build 76 to 78 280Z coupe. You will also notice the window crank mechanism is not in the same position.

Thanks, that would explain it since mine is an early '76.