Bolts,nuts, etc....where to buy?

[Surfsup]

I was wondering if there are any stores out there that have spare nuts and bolts ,washers, bushings etc. that come in a pack or something?

like a collection of bolts etc.. ? I don't know I must be losing my mind. :tapemouth

Ive lost a couple important ones. sigh.. anyways. any store would do, online or not.!

thanks

Andy

[Zs-ondabrain]

I use these guys. great resourse so far.

http://www.tacomascrew.com/

1-800-562-8192

Haven't used these guys yet but they seam resourceful. Lots of stainless supplies.

www.jamestowndistributors.com

[Surfsup]

thanks for the fast response.

I use these guys. great resourse so far.

http://www.tacomascrew.com/

1-800-562-8192

Haven't used these guys yet but they seam resourceful. Lots of stainless supplies.

www.jamestowndistributors.com

[76Datsun280z]

I use these guys. great resourse so far.

http://www.tacomascrew.com/

Those guys are great!

[Zs-ondabrain]

Those guys are great!

And they carry the Stainless as well. Only problem is the hex head is usually 2mm bigger than I'd like. I needed the 10mm head bolts for the fenders on the lip that meets the hood, all they had was the 12 mead in the same thread pattern.

But other than that, I love those guys too.

[barby27]

Tacoma Screw is great. Another place for those in the Tacoma area can also go to Northwest Fasteners. They have a lot to offer and have great service.

http://www.nwfasteners.com/

77 280Z

http://s38.photobucket.com/albums/e106/babry27/77%20Datsun%20Restoration/?start=all

[hls30.com]

Don't forget boltdepot.com

Will

[TomoHawk]

What about the oem-style screws with the phillips-hex heads and zinc plating?

thxZ

[hls30.com]

What about the oem-style screws with the phillips-hex heads and zinc plating?

thxZ

Your local nissan dealer.

I have asked every hardware company I have found, and a few have a few odds and ends, but none and no combination of those that do carry odds and ends have even close to half coverage of the needed pieces. I keep asking though!

Will

[ktm]

Ace and True Value Hardware carry a decent selection of SS metric bolts as well as Class 10.9 bolts.

[AZ-240z]

What about the oem-style screws with the phillips-hex heads and zinc plating?

thxZ

TomoHawk,

I have bought boxes of these at my local Nissan Parts Counter. Just take all of the part numbers you can find on the CD for the bolts you want, order a sample of each, and see what arrives. Some come with capture washers, but those can be cut off if needed.

Dan

[Obewon]

Here's a site that has Z nuts, bolts and screws. Hang on to your wallet, they're proud of these. Save the pdf file to your hard drive. Hope this helps.

http://www.zcarcreations.com/