Hi,

where would I buy rear axle nut(s) for a '75 240K ?,

I rang my local Nissan dealer, and spoke to a guy in "spare parts", he almost laughed at me,

and told me he could not get them.

I know I can buy a bearing kit, which has the bearings, seals, and nut, but at $50 ish each side, it's a bit more than I want to spend for 2 nuts.

I have also tried the local "nut & bolt" shop, but he could not supply a nut with the "metal lip" for the locking bit

so any help would be appreciated

and before you ask why I'm taking the rear axles out, it to fit the brackets for my disc conversion

Nigel

stewart wilkins? i think they have them listed on their website? but that could be the whole kit as you mentioned

I think Datsport sells them fort he 1600. Are the 240K ones different?

440k, not sure if they are different,

But theses are close,

the one on the left is from a MR30 Skyline (my spare parts), the one on the right are off my spare 240K

as you can see the skyline one had 3 indentations on the top off the nut (crushed), the washer are is slightly larger, not sure if this would be a issue, but I have access to a lathe,

so next week I'll see if my local Nissan dealer can supply those..

Nigel

Noodle, did the MR30 ones fit in the end?

Noodle, did the MR30 ones fit in the end?

No, In the end, I used the 240K nut with loctite.

it's still holding..

Nigel