I just bought a '76 280Z and am tring to find out what wheel and tire sizes will fit. I plan on putting a coil over suspension and fender flares. I would like 17's or 18's with at least a 10 inch wheel. Is this even possible? Pics of some would be great. The car will be a street car but it will be seeing a lot of track time as well. Any help is greatly appriciated.

This is probably the most covered topic on these boards. I'll tell you what anyone else will tell you; Use the search feature.

Not trying to be rude, but there is no solid, cut-in-stone answer to your question - too many factors. Your best bet is to put on your coil-overs & flares and then take careful measurements.

You may want to try searching on hybridz.com also.

Best of luck and welcome to the boards.

Check out the "Wheels and Tires" gallery for lots of photos with different wheel options:

http://www.classiczcars.com/photopost/showgallery.php?cat=2

10in is WIDE. Stock width is 5.75-6in, so there's a difference of about 4 inches. You'll likely need wheel spacers and wheels with significant negative offset.

thanks for the info