wheel and tire sizes

['76 Z Rod]

I just bought a '76 280Z and am tring to find out what wheel and tire sizes will fit. I plan on putting a coil over suspension and fender flares. I would like 17's or 18's with at least a 10 inch wheel. Is this even possible? Pics of some would be great. The car will be a street car but it will be seeing a lot of track time as well. Any help is greatly appriciated.

[twsutt]

This is probably the most covered topic on these boards. I'll tell you what anyone else will tell you; Use the search feature.

Not trying to be rude, but there is no solid, cut-in-stone answer to your question - too many factors. Your best bet is to put on your coil-overs & flares and then take careful measurements.

You may want to try searching on hybridz.com also.

Best of luck and welcome to the boards.

[DougN]

Check out the "Wheels and Tires" gallery for lots of photos with different wheel options:

http://www.classiczcars.com/photopost/showgallery.php?cat=2

[JonnyRock]

10in is WIDE. Stock width is 5.75-6in, so there's a difference of about 4 inches. You'll likely need wheel spacers and wheels with significant negative offset.

['76 Z Rod]

thanks for the info