I am in need of many parts for my new/used 240Z.

Currently I am in search of the fallowing parts:

Front Left and Right turn signals, Lower front cowl

pieces, front bumper and rear hatch.

I will be looking for interior pieces for both doors

and the rear interior plastic coverings. If you still

have the parts would you brake down the cost? The most

important is the bumper and hatch.

Thank you,

Leif E. Vinson

leif_80233@yaoo.com

I'm searching out some ignition problems...I need a stock coil and distributor.

TIA,

Rich

240z emblems??? front bumper and grill???

Leif - i've got some black interior plastic panels I'd sell cheap. Pretty good condition (one is cracked). PM me if you're interested.

MIchael

Would you have or know of anyone that has the orginal chrome side mirrors for the 240?

I am also looking for door / hatch locks and latch for the hatch. Hay that rimes..

Thanks,

Leif

Hi, I need a bumper and the filler pieces for an early model 260z. These are the thin bumpers. If you can help me, please let me know. Thank you, Derbyman

i need:

1) heater- a/c- radio bezel

2) a/c compressor hoses

3) glove box door

4) ignition w/key

5) turn signal and light switch clusters

all for a '72 240. If you have, please e.mail me price list to:

DEKSDA@sbcglobal.net

THANKS!

I need a rear sway bar for my '73 from a 260 and I live in Portland Or. I just found out that there are different bars on the 260 the one that I need is the one that is not stright where it passes the differential it has a bend in it to clear it.

Needed:

1974 260Z

Both left and right front fenders

Battery hold down

Fresh air control knobs

email me at fhussain213@hotmail.com

two front fenders email: klam0607@hotmail.com

I need the Front & Rear bumper and the rear bumper mounting posts. I'll take them as is if still available... Any condition will do, going on a racecar !!!

Electronic Distributor for L28