MSD6a to ZX 12-80 dizzy

[popdaddy]

Anyone know which wires from MSD go to b and c terminals on module of the dizzy?

[sblake01]

C is the - side of the coil and B is the + side on a regular setup. I'm not sure how that relates to the MSD.

[beezee]

msd white is trigger - to c msd red to b + ,msd black to coil - , msd orange to coil + The white msd wire in the instal instructions shows use with points or original ignition amplifier - wire. Page 22 in the msd literature shows general import wiring using amplifier with above wire connections.

[Carl Beck]

see if this helps

http://www.zhome.com/ZCMnL/tech/ThomasMSD.htm

FWIW,

Carl B.

[popdaddy]

what about the positive b terminal on the dizzy module,is it spliced with red from MSD and the switched 12v source?

[beezee]

http://www.msdignition.com/pdf/6%20series/pdf24.pdf I would say yes as you would need to turn on and power the small red from the keyed ignition

[beezee]

http://www.msdignition.com/pdf/6%20series/pdf1.pdf