Mallory dizzy

[1rad280]

I have a 1976 datsun 280z I cant figure out how to wire run to my balast to my promaster coil and to my mallory unilite distributor.I have 2 black with white stripes,a blue wire,and a black with blue stripe going to ballast.I know the blue goes to the neg side of the coil and a white with black stripe goes to the positive side but what about the Green,brown,and red that originaly went to the dizzy? If anyone can help or send me pics it would be great.

[Carl Beck]

See if this will help.

http://www.zhome.com/ZCMnL/tech/MalloryDist.htm

I don't know how different the wiring in the 280Z is from the 240-Z, but there might be something there you can use.

FWIW,

Carl B.

[1rad280]

They have a green and white or yellow wire i dont know what it is does. I also have a blue a black it might be the same thing im not for sure.

[Carl Beck]

Who is "they"??

Can you take a picture of your wiring?

Edited August 29, 2008 by Carl Beck

[1rad280]

The picture shows a green and white or yellow that I dont have.

Edited August 29, 2008 by 1rad280