Turn signals/hazard lights

[Lewis]

I have a 71 240 Z (71/5). I replaced the dash wiring harness and have trouble with the turn signals and the hazard lights. The hazard flasher lights do not work. The turn signals only work if I turn the hazard switch to the on position. I have replaced the flasher. I don't hear the click when I turn the flasher switch to the on position. It seems also that the brake lights do not work. Any help is greatly appreciated.

Lewis

[Zs-ondabrain]

Start checking the wiring around your Turn signal switch. The brake lights, turn signals and flasher wires go thru the T/S switch and associated wiring.

also make sure that the Flasher unit is connected correctly, there is only 2 wires so it should be an easy swap and check. Check the wires of the Hazard switch, the body of that switch is fair game to gremlins.

[ramsesosirus]

Sounds like you hazard switch might be backwards; When the hazard switch is set to on, the signals should not be able to work and vice versa.

Unless your wiring is different than mine.

HTH