Jump to content

Featured Replies

I will figure out a relay setup using two wires and the factory antenna switch ( SPDT center-off momentary.)

thxZ

I know this is old and someone has probably already figured this out, but I haven't seen it on the web...

My solution to this problem is to put a diode between the two wires of the stock switch (I wired it on the antenna side of the plug). I cut off the plug from the OEM antenna and wired it to the aftermarket one: 'blue/red to red' , 'blue/white to green' and 'black to black' placing a diode between the 'blue/red-red' and 'blue/white-green' (negative toward red).

Most of you probably know that a diode is like an electrical one way valve, so what this does is powers only one wire when the switch is rocked one way, but powers both wires when the switch is rocked the other way.

I just did this today, and its working like a champ! Other than the new antenna, no modifications or new switches were needed on the car, and it works like the OEM one did.

Edited by J03M4N


Create an account or sign in to comment

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.