calicocat Posted October 23, 2008 Share #1 Posted October 23, 2008 Can anyone point me to a link where I can get a 3.0-3.1L bored/stroked L28 from a reputable source...East coast would be best. Link to comment Share on other sites More sharing options...
gogriz91 Posted October 23, 2008 Share #2 Posted October 23, 2008 There are probably a variety of places to do it but the gold plated solution on the East Coast is Sunbelt in Atlanta.Do a search or 3.1 and see what pops up. Link to comment Share on other sites More sharing options...
ToXIc Posted October 23, 2008 Share #3 Posted October 23, 2008 http://www.rebelloracing.com/index.htm Link to comment Share on other sites More sharing options...
calicocat Posted October 23, 2008 Author Share #4 Posted October 23, 2008 Thanks...I emailed them for some options/quotes. I have a feeling this could get expensive! Link to comment Share on other sites More sharing options...
calicocat Posted October 23, 2008 Author Share #5 Posted October 23, 2008 Thanks...I emailed them... Link to comment Share on other sites More sharing options...
Oiluj Posted October 23, 2008 Share #6 Posted October 23, 2008 I can give a recommendation for Rebello. Great guys to work with. Link to comment Share on other sites More sharing options...
JimmyZ Posted October 23, 2008 Share #7 Posted October 23, 2008 Thanks...I emailed them...Let us know what you find out. I'm toying with the idea myself. I live on the East coast too.Jim Link to comment Share on other sites More sharing options...
gogriz91 Posted October 23, 2008 Share #8 Posted October 23, 2008 Check out www.zhome.com, then go to "Modifications for more power" on the right hand side, there are several articles about building a stroker motor that may be enlightening. Link to comment Share on other sites More sharing options...
GunnerRob Posted October 24, 2008 Share #9 Posted October 24, 2008 I have a feeling this could get expensive!More speed=more money:laugh: Link to comment Share on other sites More sharing options...
JimmyZ Posted October 24, 2008 Share #10 Posted October 24, 2008 (edited) Check out www.zhome.com, then go to "Modifications for more power" on the right hand side, there are several articles about building a stroker motor that may be enlightening.I've done lots of reading on such sites. The question now is what is the current cost. Over on the HybridZ site I found that Sunbelt has nice cams for our engines too. IIRC the 2mm gaskets are getting hard to come by???I would call them but don't have the serious $$$ on hand to back up my query. I don't like wasting anyone's time unless it will be worth their while.I do plan on building a stroker in the near future though.Jim Edited October 24, 2008 by JimmyZ Link to comment Share on other sites More sharing options...
inline6
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now