Hi everone,

I just finish dissamble a 1972 240Z that was in a garage that burn this summer.

I was going to send the shell to the wreck but would like to offer some parts here if it could be usefull to somebody.

Roof is not good and I have to keep the end section (quaters, hatch sill and lower section) and the radiator section

The following parts are in nearly rust free condition:

- Firewall

- wiper compartement

- dog leg (not sure of the correct name but this is the section were the door hinge are mounted) This is a rust free part even at the bottom!

- Spare tire section

- Transmission tunnel

- Floor pan seem to in good condition ut not sure at 100%. I'll have to check if somebody is interest.

- Front rail seem ok but the steel is separating near the swaybar mounted. Not sure is usable this way or could be fix. But if your going in the process in changing the rails, should have a etter one (my 2¢ only)

Can send a picture if some parts can find a good home.

Will be cutting everything in parts this week end.

Everything is free y the way.

Joce

Sorry - just had a brainfart

Edited November 6, 200816 yr by Sailor Bob

Joce:

Scott and I need the battery tray/firewall/wheel well/fender area around the battery tray for his 71 resto. I'll send details tonight when I get home.

Thanks!

Jim

Jim: I hold them for you. Note the front suspension mount hole has been enlarge for a camber plate installation.

Same thing for the rear wheel well

Edited November 6, 200816 yr by jcote75
add info

Here what the car use to look like.

You don't want to see what it look like right now........ sad day for a Z....

Edited November 6, 200816 yr by jcote75

I assume since it was in a fire, things like the driver's side door pin are no longer useable? If its still good, then I need a driver's side door pin for a '72. Thanks!

Greg

I'm interested in the driverside dogleg.

Also what condition is the front bumper in?

Where abouts in Canada are you?

The fire damage was on the passenger paint and the upper inside (roof liner, plastic parts ect.).

What is the driver side door pin? Is it the door hinge?

Six shooter: Driver dogleg is for you. Please indicate me where you want me to cut it.

For all other good parts, they are now all over the floor in the garage. I'll start by getting ride of the shell and see after what I'll be using for my project. I'll keep you inform if some parts won't be needed.

I'll try to take a few pictures tonight.

Joce-

I'd like to get the driver's side upper door hinge. This is what it should look like.

This is where it is located.

This is what mine looks like.

And just for reference, this is the dogleg

Thanks,

-Jon

Edited November 7, 200816 yr by JonnyRock
fixed mislabeled dogleg pic

And just for reference, this is the dogleg

[ATTACH]26370[/ATTACH]

Actually that's the rocker panel.

The dogleg is the part between the back edge of the door, to the wheel well, and down to the bottom of the rocker. I'll draw on a picture of what I'm after later.

six shooter - You're right, I extended the box too far. I have corrected the picture to highlight the dogleg only. The area just above the circle could be included as well, but the area I circled is were the rust most commonly is.

Yeah that would be what I need. My car seems to have come in contact with an im-movable object in that area at some point, and has pushed the metal in, which seems to be a cause of a veryy little rust. If it weren't for the actual damage, the car would just need a re-paint for the most part.