1972 shell parts to give away

[240dkw]

Joce: I would be interested in the lower front sections of the inner and outer rocker panels (the area you called the doglegs) for both sides. Z137, if you want we can share the shipping costs and I can come down to calgary and pick it up.

Dan

[jcote75]

So tried to take some picture but battery was dead.....

Anyway, I test al the parts with my bodywork hammer (don't know the correct word in english) and check for solidity.

Driver side dogleg has an inch hole in the complete bottom. Almost underneath the car.

Passenger side dog leg is in good condition.

Driver rocker is in good condition (under the driver door)

Will hitting around te battery tray, 2 holes of one inch big appear. Rest seem ok.

Windshield frame is in perfect condition all around.

Wheel well are upper rail are in ok condition on both side

Windshield motor compartment is in good condition and firewall also.

Sorry if it's not as clean as I first mention. Hammer test made me discover a few things but confirmed that other section were good.

[Six_Shooter]

It's the driver side dogleg I need. If you can take a couple pictures of the area, I may still be able to use it.

Thanks

[JonnyRock]

Drivers door hinge?

[dustin_haru]

hello my name is dustin and i am looking for some fenders and a hood? is it possible that u have any? im in high school and am short on $. thanks

[dustin_haru]

oh and would u be able to have the metal things on the bottom of the car locatted right under the doors?

[JonnyRock]

Those are the rocker panels Dustin. And to ship some fenders, let alone a hood from Canada (Quebec, I believe) all the way over to Hawaii would probably be prohibitively expensive. Especially for a hs student short on cash.

[jcote75]

For now, I'm only letting go the structural parts since I need to get the shell out this week end to clear the place.

I have to keep all the others parts for the "just in case" since i'm rebuilding my other 240Z and don't know right now all I needed to complete everything.

Joce

[ChrisZ]

Joce, i'm looking for the pice of metal bracket there is weldet to the body, it is for supporting the rear hatch strut, it is about 2 x 2 inch and bend in a angle, could you by chance help me with that.

Chris

[mikewags]

You're probably keeping the air dam, but if not - i'll gladly take that.

(figured i'd give it a shot)

Thanks.

[jcote75]

Air dam was damage............... it's in 3 piece now.

Want to have for rebuilt?

It's a nice Bob Sharp mode.

[mikewags]

Hmm, depends on how much damage it has. It might not be worth the time...

if you have any photos, feel free.