Help.. Need seat mounting bolt size.

[TriDawgn]

hey i thought i would post here as well.

story goes... i got a car that was half done by the PO and now i have no bolts to hold the seats down. Does anybody know what size bolts i need to do this?

The car is a 1972 240z.

also posted here http://www.classiczcars.com/forums/showthread.php?t=33084

[TriDawgn]

I found the answer after searching the forums for a while, just in case your intrested, heres the answer... Credits to montoya_fan01..

"Seat mount bolt size is 8mm x 1.25, with an 8mm JIS nut which requires a 12mm hex wrench.

Bolts are sized by diameter of threaded portion and thread pitch, then length of bolt. example: 8mm x 1.25 x 25mm The hex size is not used to identify the size of a bolt or nut."

Thanks buddy!