Hi,

Since I finished my turbo conversion, I'm having issue with my clutch slipping in 3rd, I've done some research and found that the 2+2 Z has a 240mm clutch, but since I live in Tassie, these would be harder to find that a 240K coupe,

so what I'm after, are there any other Nissan / Datsun that has a 240mm clutch that will fit my 240K

Nigel

You can always get a brand new Valeo clutch kit off ebay that comes with the 240mm flywheel. Lots of the newer Nissans up into the mid 90's use the 240mm flywheel btw.

Greg

You can always get a brand new Valeo clutch kit off ebay that comes with the 240mm flywheel. Lots of the newer Nissans up into the mid 90's use the 240mm flywheel btw.

Greg

I would think the freight to Tasmania (Australia) would be more than the kits worth, I would need something local

Nigel

When we did the conversion on Lachlan's car, he bought a new clutch and IIRC, he ended up with a Silvia clutch. I can't remember exactly, but there were a few that matched, Silvia being one of them.

Another alternative is to talk to Jim Berry at Stones Corner in Brisbane. he builds a lot of hi-po stuff sold by the big name boys, and tends to be a lot cheaper. You will have to call him, as he isn't a interweb sort of guy (at least wasn't when I last dealt with him a few years ago - might have caught up to the 21st century by now)