tripple 50 mm Mikuni set

[Doehring]

Hallo Fred, but also Guus, Alan. Sean, Mike and all,

I'm back from Portugal where I had some possibilities to look into

these threads, but I couldn't answer. Fred , in one thread you and Sean discussed inner fender protections. Please look into the gallery for my pictures. I think it is the last pic on my 2nd page that shows the inner front fender protections that are available from a finnish producer. If you need more info let me know.

Rolf

[Caen Fred]

Hallo too, do you think that a mould could be done out of it?

Hope you had sun down there (well, here you see, fellow Australian than when we say south in Europe it doesn't go a lot farther than Spain or Portugal!) cause’ winter is coming fast around here…

Any advice about Zutopia, should we count your club in also?

Take care, Fred

[Doehring]

Fred, the finnish protections are made from alloy with rubber trims.

They are not that expensive that it would make sense to develop a moulding for plastics. The big advantage of alloy is that you can twist. cut and bend it until it suits best. It wiil not burst and it can't rust.

Concerning Zutopia I read your conversation . I don't know how much the german Z&ZX Club (Sean has got the adress) would be engaged. Personally I have two hearts beating in my brest: On the one side I mainly agree with Alan to make it a classic Z meeting mainly, on the other hand - depending on how far to drive for a meeting - I would prefer to go there with my more conveniant 300 ZX and I would not be interested to drive that on a race track, exept perhaps Nuerburgring. But I like the idea to meet as many of this "Classic Z club's european members as possible personally - and their Zs. In that case I would think about a long ride with my 240 Z, too. Did you think

Rolf

[IM4A2Z]

I have a set of 44mm Triple's with Manafold, Linkage, and all hardware. Also have Velocity stacks and K&N filters for the set as well. I can provide pictures if anyone is interested. I used them on a 280z for just over a year and for the last three years have been in garage. They are in excellent shape!

McKinney, Texas just outside of Dallas.

[McZ]

Send pics and your asking price to mechx@hotmail.com. Thanx!