This is what the rear deck looks like now. I applied about 5 thin coats of Por 15 then while it was finger dry I shot some silver paint on her. Doesn't she look sharp or what? :classic:

On the Hatch Sill rust.... I beleive the ral issue is the design of the sill.

In my 72 240Z the hatach sill had two layers of metal that were poorly

seam sealed. This factory error let rust form in between the two layers

of metal. I ended up:

1. removing the top layer

2. Clean etch and POR coat the bottom layer

3. Weld back on the top layer and POR it too

4. Primer

5. Paint

zdisease - Not just a Z