Metric speedo overlay

[Jeffrey]

I made two metric speedo overlays for anyone interested in a metric speedometer. They are calibrated for a 260z mph speedometer. Just print them out and stick them on.

If you use them post some pics.

I have attached them to the post but for the full resolution right click link and select save as.

http://www.atlanticz.ca/260z_metric_speedo_guage_black.jpg

http://www.atlanticz.ca/260z_metric_speedo_guage_white.jpg

Edited May 24, 2009 by Jeffrey
Attached images.

[DatsunDave09]

I'm not seeing anything, or is it my computer. I got "X"s over here

[psdenno]

Works for me. One black face & one in white. Nice job!

Dennis

[Jeffrey]

If you are using Internet explorer for a browser you will have to right click and save as to download the images. IE does not display jpgs directly sometimes. I tried to upload as an attachment but they are too big pixel wise. I'll try get them to display another way for IE guys.

Edited May 24, 2009 by Jeffrey

[ChrisZ]

Jeffery, is that from the scan i send you ?

Chris

[Jeffrey]

I scanned my 260z mph guage and used Adobe Illustrator to create these based on my scan. I wanted to make sure if I overlaid this on to a 260z mph guage that it would be correct.

I had to check my email to see who sent me a km/h guage scan a while back. It was you Chris. Thanks.

I still have the Illustrator files if any profesional vinyl guage guys want it for the correct font.

Jeffrey

[ChrisZ]

Don't use the scan i send you Jeff, the needle is bouncing up and down

[Jeffrey]

I figured that's why you sent it to me as it wasn't working well.

[240dkw]

Nice work, when I had my speedo apart to clean it I noticed that it had a metric scale on the outside of the dial, which is hidden by the bezel when it is put back together. It only has makings at 80,100,140,180 (this is a guess as am going by memory).

Dan

Edited May 26, 2009 by 240dkw

[Jeffrey]

Dan was it a 240z speedo?

[240dkw]

Yes it is, I always wondered why there were markings that can only be seen if you look on a angle. I took a photo of my speedo. Sorry for the quality. The marks are at 50, 65, 100 and 130 mph with the very small numbers hidden fully under the bezel of 80,100,160 and 200 kph. Is the 260 different?

[Jeffrey]

Here is my 260z scan. Looks the same. The 90 looks to be positioned in the same place on both speedo's. This should work fine on your speedo.

Edited May 28, 2009 by Jeffrey