Well I feel like an idiot

[=Enigma=]

Sorry Jared. I guess I read too much into the association between his behavior and fitting in at Hybridz. From a mod perspective, he'll definintely fit right in. My bad.

[1 Bravo 6]

I thought I'd check this Jacob bloke out just to see how old he is. There had been 6 others who may have had the same idea. It should be noted that not one had sent him a PM.

His statements show him to be very juvenile either in age or outlook and is the first member to be placed on my ignore list in the years I've been a member.

With any luck he'll go away.

Jacob, .... if you read this, in my opinion, you richly deserve the title of RICHARD CRANIUM.

Rick.:devious::devious:

[DatsunZsRule]

Sorry Jared. I guess I read too much into the association between his behavior and fitting in at Hybridz. From a mod perspective, he'll definintely fit right in. My bad.

Hey I've done it before too. No Big deal man

[=Enigma=]

Yeah, he's my fisrt ignore in 5 or more years on the site as well. Kinda surprising actually. I saw no point in PMing him. Hopefully he'll get banned or move on.

[Mikes Z car]

Both of my frame rails are pushed up in the middle due to some sort of past high centering though the drivers side is much worse (maybe 1 1/2 inch upwards). As I hammered the floorboard down on the passenger side with a short 2X2 as a drift and a ball peen hammer (ours feels heavier than a standard hammer), I noticed that the frame rail after I targeted it seemed to be pushed down straighter a bit too which was more than I had hoped for. Maybe this will work on the other frame rail that is much worse? Maybe a longer 2X2 and a lightweight sledgehammer would be in order so that I would be swinging outside the car so I don't risk hitting the interior of the car with the hammer? I don't care about the way the floor looks so much but an area in front of the driver's seat is noticeably higher than the rest of the floor under my foot. As I tried to straighten the passenger side frame rail I was careful to hit on either side of the frame rail on the floor as opposed to hitting in the middle of the upward curve that is over the frame rail.

Mike

[z4life92]

ok so my bad for the rude comments before... thats when i first got on this website and was immature. now i have found out that the people on this site have lots of usefull info and is no place for kids bull**** so i apologize