Jump to content

Featured Replies

I'm finally back on my 240z resurrection project and have stripped the header and exhaust manifolds off the '75 280 engine I have.

I never had an engine in the 240z that I bought to compare but I'm not sure where this tube is going to connect once the engine is in place. I am putting SU carbs on the engine and do not plan to run the water heating through the carbs since I live in CA where it is never cold enough to worry about heating the carbs.

I have included a picture of the tube that sticks out of the side of the engine and attached to the intake manifold that I took off.

Also, I found out that I only have 1 of the 2 brackets that bolts to the block of the engine and attaches it to the motor mounts. If anyone in the San Jose, CA area has a spare one of these brackets I’d love to get it from you so that can drop the engine in and start hooking things up.

post-16476-14150807917036_thumb.jpg

post-16476-14150807917264_thumb.jpg


Create an account or sign in to comment

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.