Zs-ondabrain Posted November 16, 2009 Author Share #73 Posted November 16, 2009 (edited) As always, Thanks for the Rave Reviews. If you guys keep doing that, The fall from my pedastool will be a long one. Thanks guys.On to business.....If all the people that said they mailed an order last week truly did so, My mail carrier is gonna have quite the bundle for me tomorrow. I'll update with each peice of mail with an "Order and Payment Received" next to your name.I'll also keep updating names and status on post # 114 on page 12.bajcsi, SSuspect and =Enigma=, you're on. Thanks again guys,Dave Edited November 23, 2009 by Zs-ondabrain Link to comment Share on other sites More sharing options...
SSuspect Posted November 16, 2009 Share #74 Posted November 16, 2009 (edited) As always, Thanks for the Rave Reviews. If you guys keep doing that, The fall from my pedastool will be a long one. Thanks guys.Dave FYI Dave - Got everything buttoned up in the column tonight (still need to clean up wire under dash). You can see your combo-switch handy work here. Thanks for your help! (sorry for side-tracking the thread)... :stupid: Tim Edited November 16, 2009 by SSuspect Link to comment Share on other sites More sharing options...
Zs-ondabrain Posted November 16, 2009 Author Share #75 Posted November 16, 2009 (edited) Looks good but make sure you tuck those wires before you're done. Or is that an Obvious thing? If you want, repost this in the Review section or on the Combo turn signal service thread. http://www.classiczcars.com/forums/showthread.php?t=24304Keep us updated.Dave Edited November 16, 2009 by Zs-ondabrain Link to comment Share on other sites More sharing options...
pbarcher Posted November 16, 2009 Share #76 Posted November 16, 2009 I'll take one for my stock 73Peter Barcher Link to comment Share on other sites More sharing options...
Zs-ondabrain Posted November 16, 2009 Author Share #77 Posted November 16, 2009 Just an FYI, I ordered 50 to be made. So if you don't see 50 names on post #65, then they are still available. Peter, you're on the list.Thanks guys.Dave Link to comment Share on other sites More sharing options...
Zs-ondabrain Posted November 16, 2009 Author Share #78 Posted November 16, 2009 Just got back from the shop and measured up the new Mount. Brought it home and did a quick instal and everything is great. The pictures below if of the prototype but the production unit will have the oblong holes like the original. Also, back plate will be inset 1/4" like the original. It cleared the brake likes easily but as stated before, the fuel line bracket might need to be moved a few inches forward. But this will also allow you to retain the clamp and not have to remove it, just slide it forward. All new names were added and a few were updated. Here ya go. Dave Link to comment Share on other sites More sharing options...
RT Hunter Posted November 17, 2009 Share #79 Posted November 17, 2009 Will that bend try to straighten out gradually if the diff keeps thrusting up? Link to comment Share on other sites More sharing options...
SSuspect Posted November 17, 2009 Share #80 Posted November 17, 2009 Looks good but make sure you tuck those wires before you're done. Or is that an Obvious thing? If you want, repost this in the Review section or on the Combo turn signal service thread. http://www.classiczcars.com/forums/showthread.php?t=24304Keep us updated. Dave I will re-post in the review section. Will post pics of the HLH install too. I have plenty of "wire management" to finish up under the dash... Back to this thread... payment sent for the R/T mount! Thanks again! Tim Link to comment Share on other sites More sharing options...
Zs-ondabrain Posted November 17, 2009 Author Share #81 Posted November 17, 2009 Will that bend try to straighten out gradually if the diff keeps thrusting up?Absolutely Not. This is 3/16" steel. I can't imagine any 400HP or less motor bending this at all. The back plate is also welded on the sides and top. And if by some weird chance it did bend, I'd like to know what the hell is under the hood. I think you'd snap an axle, U-joint or something else before that would happen.Good question though,Dave Link to comment Share on other sites More sharing options...
Zs-ondabrain Posted November 17, 2009 Author Share #82 Posted November 17, 2009 Just checked the mail. Got 5 more orders in and updated the names and status on Post #65. Thanks again guys. The New pictures of the Prototype are on Post #78Dave Link to comment Share on other sites More sharing options...
Zs-ondabrain Posted November 17, 2009 Author Share #83 Posted November 17, 2009 Hey Phred, Sorry bout that, you're on the list now. Had a brain-fartDave Link to comment Share on other sites More sharing options...
70 Cam Guy Posted November 17, 2009 Share #84 Posted November 17, 2009 You can count me in, this looks great.Your fab guy looks like he does great work. Deburred edges, clean bends, clean TIG welds. This coming from someone that was a QE at my last job, inspector before at the same company, and worked for a machine shop during school.Being a QC inspector can ruin the fun sometimes because after a while, you just notice everything. My friend showed me a ring her bf gave her and I asked her about a flaw that I figured she'd noticed. She hadn't even seen it... I felt like such a jack a** :stupid: Link to comment Share on other sites More sharing options...
Seppi72
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now