R-T diff mount Group Buy

[Terrapin Z]

Dave,

Please put me down for one as well I just replaced my mount with a stock piece and am sure it will rip out again.

Id rather have the mount for when it goes than not.

PM sent

TZ

[70 Cam Guy]

ROFLThe $5.00 is so I don't get mugged carrying $180.00 into a 711 to buy a money order!

You know, if you were in Richmond California that would be a real risk

Thanks Dave, the production part looks beefy

I told my friend about this but he's too broke right now. He just bought everything T3 makes for the S30 except the rear end conversion. Coil overs, camber plates, fr/rr control arms, caster rods, etc, etc, blah, blah :eek:

[Darrel]

Dave,

Please put me down for one as well I just replaced my mount with a stock piece and am sure it will rip out again.

Id rather have the mount for when it goes than not.

PM sent

TZ

Don't wait for the new mount to rip before installing the rt. Get the bump stop and keep the stock mount. Pics are in previous posts.

[conedodger]

The Vikings are experimenting with a new formulation of Geritol. We may have to keep him for another year after this. It is a prospective experimental study... It seems to be working!

[Terrapin Z]

Don't wait for the new mount to rip before installing the rt. Get the bump stop and keep the stock mount. Pics are in previous posts.

Thanks Darrel, Dave filled me in on this as well, Being it is winter, what better time to fix it.

[Z CAR 77]

Hi Dave,

Please put me down for one. I'll put a check for $60 in the mail Friday (11/27). Have a great turkey day and thanks for putting this together

Stan Norton (Z CAR 77)

[Darrel]

Who ever uses the bump stop, please take pics so we have a record of the install and measurements.

I would have, but it was the night before my track day and I was replacing the diffy as well. I don't think I got 4 hrs sleep.

[240Adam]

Dave put me down for one, Ill come pic it up this weekend. I PMed you a couple days ago. Give me a call! Adam.

[Zs-ondabrain]

Z Car 77 and 240Adam, you're on the list.

Adam, sorry I haven't called, been super busy, Obviously.

I'll call you later today, gonna need a smoke break from the inlaws sooner or later. hehehe.

[Arne]

Who ever uses the bump stop, please take pics so we have a record of the install and measurements.

I would have, but it was the night before my track day and I was replacing the diffy as well. I don't think I got 4 hrs sleep.

I'll be doing it with the bumpstop, and will be happy to document it. But I don't know how soon after I get the mount I'll get around to installing it. Might not be until after the first of the year.

[Zs-ondabrain]

I'm sure someone will get to it sooner. Too many winter "In progress" projects going on. They just need to remember to grab the camera and snap a few shot.

I think the best way would be to mount the diff onto the stock mount and cross member, mount the R/T into the car without the Poly bolted on. Raise the diff into place, put 2 bolts in to hold it in place and measure the distance between the top of the diff and the mounting area of the R/T Mount.

Then make that measurement on the Bump stop, grind it 1/8" longer and bolt it in. Raise the diff and bolt it in, done.

I would also note that the 4 bolts should be placed into the R/T when mounting it, then push up on the mount while tightening the bolts. This will eliminate any upward movement of the R/T while driving.

Dave

[Zs-ondabrain]

After adding it all up, there are 44 spoken for. Leaving only 6 more. Just an FYI for the people thinking about it.

Not sure if I'll do another run or not so I wouldn't wait too long.

Dave

Edited November 27, 2009 by Zs-ondabrain