Hey there everyone, Well with all the help I've gotten through this forum, I'm sure this question won't pose much of a challenge, and forgive me for not taking a pic of the wiring connections when I removed it, but...I need help on reconnecting the harness and battery to the solenoid of the starter. does anyone have a pic of the proper set-up? If not, can you tell me how the wires connect to the starter?...thanks in advance for the help.

dodger

The battery cable gets bolted to the solenoid using the stud that DOES NOT have a copper wire going to the starter motor.

The ring terminaled wire (white or white/Red) goes to that same stud.

The starter wire (yellow/black with a vinyll sleeve) plugs into the small male terminal

The ground cable from the battery is bolted to the starter bolt that bolts the starter to the transmission.